1. Home
  3. Cables
  5. Hexatronic Stingray Air Blown Fiber - High Performance Air Blown Fiber ABF 2-12 fibers G657A2 TIA598 - Box

Hexatronic Stingray Air Blown Fiber - High Performance Air Blown Fiber ABF 2-12 fibers G657A2 TIA598 - Box

$0.00
$0.00
Shipping calculated at checkout.
SKU:
$0.00
$0.00
FiberOptics24.comHexatronic Stingray Air Blown Fiber - High Performance Air Blown Fiber ABF 2-12 fibers G657A1 TIA598 - Box
Hexatronic Stingray Air Blown Fiber - High Performance Air Blown Fiber ABF 2-12 fibers G657A1 TIA598 - Box
Hexatronic Stingray Air Blown Fiber - High Performance Air Blown Fiber – Super Slim ABF 12-24 fiber G657A1 200 μm TIA598 - Box
FiberOptics24.comHexatronic Stingray Air Blown Fiber - High Performance Air Blown Fiber – Super Slim ABF 12-24 fiber G657A1 200 μm TIA598 - Box

Air Blown Fibers (ABF) are extremely slim cable units with a diameter of only 1 to 1.6 mm. Despite the super slim design each Air Blown Fiber has a capacity of 2 to 24 fibers. Air Blown Fibers can be installed in all types of microducts with an inner diameter of 2 up to 6 mm. Air Blown Fiber are especially suitable for drop connections in Fiber To The Home installations.

  • Extra strong and durable design
  • Smooth, low-friction sheath
  • 2, 4, 6, 8 or 12 fiber, G657A2 bend resistant fibers
  • Extra wide operational temperature range
  • Water and Ice tested
  • State of the art blowing performance
  • Zero sheath shrinkage

    Application 

    Hexatronic Stingray is a high performance Air Blown Fiber Unit intended for blowing into microducts. The main application area is for fiber access networks such as Fiber To The Home (FTTH).

    Design

    The Hexatronic Stingray Air Blown Fiber is designed with durability and performance in mind. The unique design offers a combination of properties previously not available on the market. A sturdy fiber unit with state of the art fiber blowing performance increases the installation success rate and provides quick and problem free installation. The Stingray has a unique sheath material with zero sheath shrinkage ,wich means no fragile splice points or sensitive installations in wall outlets or fiber cabinets.

    The Air Blown Fiber unit is colored dark blue for good visibility when installed in semi-translucent microducts.

    The Air Blown Fiber is delivered in bulk lengths in cardboard PANs. For optimum blowing performance, use the Hexatronic Air Blown Tool LTT 179 2040.

    Product Information

    1. Primary coated fiber: Silica, acrylate
    2. Primary coating: UV-cured acrylate
    3. Sheath: Low friction polyolefin

    A mechanical filler is used in the 2-fiber unit as well as in the center of the 6-fiber unit.

    Technical Information

    Product Color Dark blue
    Color Code TIA598
    Temperature, Operation [°C] –45 to +70
    Temperature, Storage [°C] –45 to +70
    Temperature, Installation [°C] –15 to +60
    Fiber Type G657A2
    Attenuation @Wavelength [nm] 1310/1550
    Maximum Attenuation [dB/km] 0.38/0.25
    Conformance

    Air blown fiber: IEC 60794-5-20
    Bend radius: IEC 60794-1-21, Method E11
    Crush resistance: IEC 60794-1-21 Method E3
    Kink: IEC 60794-1-21 Method E10

    Tensile force during installation: IEC 60794-1-22, Method F1

    Fiber parameters and tests according to the IEC series 60793-2 and 60793-1
    Technical Notes Water immersion and repeated freeze test:
    Hexatronic standard test, 100 cycles, –25, to +15ºC
    Installation Notes

    Typical installation performance:

    • Ducts ID 3.5-4 mm: 1000 m

    Installation performance is affected by the installed path, environmental conditions, installation equipment etc and actual performance may therefore deviate from the above specified values.
    Ordering Information

    Supplied lengths: 1000, 2000, 4000, 6000 m

    Delivered in cardboard boxes