CableMaster 850 Softing 226521

CableMaster 850 offers a multitude of network diagnostics features for trouble-shooting such as cable tracing, link detection up to 1Gb/s, Ping, network discovery, PoE. CableMaster 850 is a professional cable tester equipped with an RJ45 jack for network cables and an F-type connector for coaxial cables. The CableMaster 850 verifies the wire map, determines the cable length and distance to the fault. The results can be saved and documented using the PC-based reporting software.

Features

• Tests network and coaxial cables (RJ45 jack and F-type connector)

• Displays wire map in graphical format for rapid troubleshooting

• Determines cable length and distance to the cable fault performing a full TDR measurement

• Cable/port identification using the cable/port ID remotes

• PoE detection and load test

• Link test up to 1 Gb/s to identify link capability and current link status

• Pinging of individual or lists of IPv4 and IPv6 addresses as well as any URL on internet

• Network Discovery creates lists of broadcasted devices

• CDP/LLDP/NDP and VLAN discovery

• High resolution colour display for excellent readability in any environment

• Generation of test reports and documentation with PC-based reporting software

Applications

• Network Configuration and Capability Testing

• Coax Cable Testing

• Length Testing

• Miswire Troubleshooting

• PoE Testing

• Cable Tracing and ID

Specifications

Softing CableMaster 850 Specifications

Measurement Technology	Time Domain Reflectometry (TDR)
Cable Measurements	Cable Testing and ID: up to 1,000 ft (305 m) Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m) Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft) Supports 8 continuity and ID numbers remotes (RJ 45) Supports 20 RJ 45 and 20 F connector ID only remotes
Power over Ethernet	Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE Tests for classes and loads cable up to 25.5 watts (at class 4 Identifies Mode A or B (pairs with PoE)
Active Ethernet	Indicates advertised speeds of 10/100/1000 base-T half or full duplex Can Link to network at 10/100 base-T
Network Discovery Test	Discovers and displays attached network devices Ping IPv4/URL/IPv6 DHCP/DNS Test LLDP/CDP identification TCP/UDP Connectivity test Port LED blink link in 0,1 Hz-steps
Reporting	PDF/CSV reports with PC- Software
Maximum Voltage	Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester RJ Jack: 66 Vdc or 55 Vac F-connector: 50 Vdc or Vac
Save Test Results	Stores up to 250 Cable or network tests with user defined names
Tone Generation	Tone Frequencies: 730 Hz and 1440 Hz
Languages	English, French, German, Spanish
Battery Life	For 6xAA, 9VDC, 2,200 mA-hr (typical) alkaline battery: Operating - 20 hours typical Standby - 1.5 years typical (200 uA max standby current), Batteries are included
Altitude	10.000 ft (3048 m) operating
Temperature	Operating: 32 to 122°F (0 to 50°C) Storage: -22 to 140°F (-30 to 60°)
Humidity	10 to 90% non-condensing

Includes

CableMaster 850 set includes:

• 1 x CableMaster 800 basic unit;

• Cable Tracker Tone Probe CT15;

• 8 x Remote Units;

• 1 x RJ45 Cabel/alligator clip;

• 20 x coax remotes with labeling (1-20);

• 9 x RJ45 Cable;

• 6 x AA Batteries,

• Micro USB-Cable,

• Pouch