1. Home
  3. Microducts
  5. Indoor Microduct Assembly 5/3.5 mm – High Grade FRD 5/3.5 mm 1-24 -way HG

Indoor Microduct Assembly 5/3.5 mm – High Grade FRD 5/3.5 mm 1-24 -way HG

$0.00
$0.00
Shipping calculated at checkout.
SKU:
$0.00
$0.00
FiberOptics24.comIndoor HexaSpeed Microducts Inhouse Single ducts - low-smoke, flame-retardant and halogen-free
Indoor HexaSpeed Microducts Inhouse Single ducts - low-smoke, flame-retardant and halogen-free
Indoor Microduct Assembly 3/2 mm – Standard Grade FRD 3/2 mm 1-24 -way SG
FiberOptics24.comIndoor Microduct Assembly 3/2 mm – Standard Grade FRD 3/2 mm 1-24 -way SG

  • FRD 5/3.5 mm 1-24 -way HG

    • For indoor installation
    • 5/3.5 mm microducts
    • Halogen-free, flame-retardant, high grade
    • 1, 4, 7, 12, 19 or 24 over-sheathed ducts
    • Low friction inner surface for maximum installation lengths

    Application

    The indoor tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of air-blown fibers. These microducts are highly flame retardant and therefore suitable for indoor use.

      Design

      The duct assemblies are available in several versions from 1 to 24 microducts . Each microduct has an outer/inner diameter of 5/3.5 mm. The microducts and duct assemblies including the outer sheath are made of halogen-free, flame-retardant polymer. One unsheathed single duct version for minimal cross section is available for installation in existing external protective microducts or sheaths.

        Product Information

        Microducts and sheath: Halogen-free, flame-retardant polyolefin

        Technical Information

        Temperature, Operation [°C] -20 to +60
        Temperature, Storage [°C] -20 to +60
        Temperature, Installation [°C] -20 to +50
        Reaction to Fire IEC60332-3-24, IEC60332-1
        Conformance

        Abrasion: IEC 60794-1-2-E2B(1)
        Kink: IEC 60794-1-2-E10, 20 x outer diameter
        Impact: IEC 60794-1-2-E4
        Crush: IEC 60794-1-2-E3
        Tensile: IEC 60794-1-2-E
        Bend: IEC 60794-1-2-E11A
        Torsion: IEC 60794-1-2-E
        Flexibility: IEC 60794-1-2-E8
        Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D
        Flammability: IEC60332-3-24, IEC60332-1
        Smoke density: .IEC61034-2
        Smoke volume: ASTM E662
        Halogen Content: IEC 60754-1, 0%
        Acidity/Halogen contents: IEC60754-1/-2
        Toxicity index: DEFSTAN 02-713
        Marking Duct assemblies have markings showing the tube length. The individual microducts are numbered.
        Installation Notes Flammability according to IEC60332-3-24 refers to sheathed empty ducts and sheathed ducts installed with typical versions of Hexatronic blown fiber units. 1-way unsheathed duct MPB30246/01 excluded. The unsheated duct shall be installed in flame resistant protective cover for best fire performance.