1. Home
  3. Hexatronic Stingray Air Blown Fiber - High Performance Air Blown Fiber – Dual-end, Pre-terminated ABF 2 fibers G657A1 TIA598 - Reel

Hexatronic Stingray Air Blown Fiber - High Performance Air Blown Fiber – Dual-end, Pre-terminated ABF 2 fibers G657A1 TIA598 - Reel

$0.00
$0.00
Shipping calculated at checkout.
SKU:
$0.00
$0.00

Air Blown Fibers (ABF) are extremely slim cable units with a diameter of only 1 to 1.6 mm. Despite the super slim design each Air Blown Fiber has a capacity of 2 to 24 fibers. Air Blown Fibers can be installed in all types of microducts with an inner diameter of 2 up to 6 mm. Air Blown Fiber are especially suitable for drop connections in Fiber To The Home installations.

  • Pre-terminated fiber on reel
  • Blowable ferrule at outer end
  • Time saving installation
  • Several connector options
  • Extra strong and durable design
  • Smooth, low-friction sheath
  • 2 fibers, G657A1 bend resistant fibers
  • Extra wide operational temperature range
  • Water and Ice tested
  • State of the art blowing performance
  • Zero sheath shrinkage

    Application 

    Hexatronic Stingray is a high performance Air Blown Fiber Unit intended for blowing into microducts. The main application area is for fiber access networks such as Fiber To The Home (FTTH).

    Design

    The Hexatronic Stingray Air Blown Fiber is designed with durability and performance in mind. The unique design offers a combination of properties previously not available on the market. A sturdy fiber unit with state of the art fiber blowing performance increases the installation success rate and provides quick and problem free installation. The Stingray has a unique sheath material with zero sheath shrinkage, which means no fragile splice points or sensitive installations in wall outlets or fiber cabinets.

    The Air Blown Fiber unit is colored dark blue for good visibility when installed in semi-translucent microducts.

    The Air Blown Fiber is delivered in fixed lengths on cardboard reels with pre-terminated connector at inner end and blowable ferrule at outer end. For optimum blowing performance, use the Hexatronic Air Blown Tool LTT 179 2040.

    Product Information

    1. Primary coated fiber: Silica, acrylate
    2. Primary coating: UV-cured acrylate
    3. Sheath: Low friction polyolefin

    A mechanical filler is used in the 2-fiber unit.

    Technical Information

    Product Color Dark blue
    Color Code TIA598
    Temperature, Operation [°C] -40 to +70
    Temperature, Storage [°C] -40 to +70
    Temperature, Installation [°C] -15 to +50
    Fiber Type G657A1
    Attenuation @Wavelength [nm] 1310/1550
    Maximum Attenuation [dB/km] 0.38/0.25
    Insertion Loss, max [dB] 0.25
    Return Loss, min [dB] SC/UPC & LC/UPC: 55, SC/APC & LC/APC: 65
    Conformance

    Air blown fiber: IEC 60794-5-20
    Bend radius: IEC 60794-1-21, Method E11
    Crush resistance: IEC 60794-1-21 Method E3
    Kink: IEC 60794-1-21 Method E10

    Tensile force during installation: IEC 60794-1-22, Method F1

    Fiber parameters and tests according to the IEC series 60793-2 and 60793-1
    Technical Notes Water immersion and repeated freeze test:
    Hexatronic standard test, 100 cycles, –25, to +15ºC
    Installation Notes

    Typical installation performance:

    • Ducts ID 3.5-4 mm: Recommended upto 500 m

    Installation performance is affected by the installed path, environmental conditions, installation equipment etc and actual performance may therefore deviate from the above specified value
    Ordering Information

    Supplied lengths: Fixed lengths from 25 to 500m

    Delivered on miniature cardboard reels